Permanent Steel Manufacturing Co.,Ltd

Home  >  Hot News  >  Current News

Main Import and Export Situation of Oil Casing Pipe

Date:2019-10-18    keywords:oil casing pipe,import and export
     The casing pipe is a large-diameter pipe that acts as a fixed oil and gas well wall or wellbore. The casing is inserted into the wellbore and fixed with cement to prevent the wellbore from separating the formation and the wellbore from collapsing, and to ensure that the drilling mud circulates for drilling.Different types of casing used in oil extraction:
     The surface oil casing is to protect the well from being contaminated by shallow water and shallow gas layers, supporting the piercing equipment and maintaining other layers of the casing.
     The technical oil casing is to separate the pressures at different levels so that the drilling fluid can flow normally and protect the production casing to install the anti-burst device, the leakage prevention device and the tail pipe in the drilling.
     The oil layer oil casing mainly exports oil and natural gas from the subsurface storage layer, protects the well with the liver, and stratifies the drilling mud. When producing oil casings, the outer diameter is usually 114.3 mm to 508 mm.
     The main importing countries of oil casings are: Germany, Japan, Romania, Czech Republic, Italy, Britain, Austria, Switzerland, the United States, Argentina, and Singapore. More import standards refer to American Petroleum Institute standards API5A, 5AX, 5AC. The steel grades are H-40, J-55, N-80, P-110, C-75, C-95 and the like. The specifications are mainly 139.77.72R-2, 177.89.19R-2, 244. 58.94R-2, 244.510.03R-2, 244.511.05R-2, etc.
     The API has three lengths: R-1 is 4.88 ~ 7.62m, R-2 is 7.62 ~ 10.36m, and R-3 is 10.36m to longer. In addition to adopting the API standard, there are a small number of Japanese factory standards (such as Nippon Steel, Sumitomo, Kawasaki, etc.) imported from Japan. The steel grades are NC-55E, NC 80E, NC-L80, NC-80HE, etc.
     Some imported goods are marked with the word LTC, namely the filament sleeve. In the case of the claim, there have been problems such as black buckle, thread damage, tube folding, broken buckle and thread tight distance, and the appearance of defects such as J-values of the coupling and the inherent quality problems such as casing cracking and low yield strength.


©2017 Permanent Steel Manufacturing Co.,Ltd  https://www.permanentsteel.com  All Rights Reserved.  Terms of Sale|Privacy Policy

We use cookies to offer a better browsing experience, analyze site traffic, and personalize content. By using this site, you agree to our use of cookies.