Stainless Steel Tube Cutter

Stainless steel tube cutter is divided into laser cutter, planetary cutter, water cutter, etc., which has high production efficiency, fast and so on, mainly used for cutting cast iron, cast steel, structural steel.

Performance of stainless steel tube cutter
1. It can be cut processing, high production efficiency, fast, no deformation of the surface, no burr, especially for welding quality and efficiency requirements of the occasion.
2. Wide range of applications.
3. Applicable materials: cast iron, cast steel, structural steel, tool steel, bearing steel, stainless steel, copper and copper alloy, aluminum and aluminum alloy, plastic and so on.
4. Applicable to a wide range of sizes.
5. The use of multi-cutting technology, pipe static, tool rotation, high safety performance.
6. With temperature protection, long motor life.
7. When the pipe is automatically aligned, and can automatically feed, easy to operate.
8. The main motor with constant speed feedback adjustment, cutting groove smooth process.
9. All specifications can be achieved automatically feed function, easy to use.
10. Design lightweight, lightweight and easy to carry, on-site cutting has a unique advantage.

Operating procedures of stainless steel tube cutter
1. Before use, should check and confirm the motor, cable are normal, good grounding protection, protective device safe and effective, saw blade selection to meet the requirements, the installation is correct.
2. After starting, should be no-load operation, check and confirm the direction of operation of the saw blade is correct, flexible lifting mechanism, no abnormal operation, abnormal sound, all normal, before operation.
3. Operators should press the workpiece in hand, even feeding, in the promotion of cutting machine, not too much force. Do not wear gloves during operation.
4. Cutting thickness should be carried out according to the mechanical nameplate, not too thick cutting.
5. Processing parts sent to the blade at a distance of 300mm or cutting small pieces of material, should use a special tool feeding, not directly by hand push material.
6. Operation, when the workpiece impact, beating and abnormal sound, should immediately stop checking, troubleshooting, before continuing operations.
7. Do not check and repair the parts during operation. The debris in the saw and on the saws shall be removed in a timely manner by means of special tools and shall not be picked or wiped by hand.
8. After the operation, should clean the fuselage, wipe the blade, drain the water tank, take back the cable, and stored in a dry, ventilated place.