Home  >  Products  >  HDPE Pipe
  • MPP Power Cable Protective Pipe

    MPP Power Cable Protective Pipe

    Specifications:
    Ordinary Type Outer Diameter(mm) Wall Thickness(mm) Ordinary Length(mm)
    110 5 6, 9 or as required
    160 8 6, 9 or as required
    180 12 6, 9 or as required
    200 13 6, 9 or as required
    225 15 6, 9 or as required
    250 15 6, 9 or as required
    Enhanced Type Out Diameter(mm) Wall Thickness(mm) Ordinary Length(mm)
    110 7 6, 9 or as required
    180 10 6, 9 or as required
    200 15 6, 9 or as required
    225 16 6, 9 or as required
    250 18 6, 9 or as required


    Properties:

    Project Index
    Density(g/cm3) 0.91 - 1.95
    Coefficient of sliding friction <0.3
    Tensile strength 23℃ ±2℃(Mpa) ≥24.0
    Flexural strength 23℃ ±2℃(Mpa) ≥37.0
    Flexural modulus(Mpa) 1000 - 1200
    Flat test 1/2 Not broken
    Vicat heat (10N, 50℃, h) ℃ ≥90
    Drop hammer impact test (20mm, 3kg, 2m) 9/10 Qualified
    Ring-chip thermal compression force(KN) 1.06

©2017 Permanent Steel Manufacturing Co.,Ltd All Rights Reserved.  Terms of Sale|Privacy Policy