Connection of
stainless steel water supply lines are as follows:
Pressurized connection
Pressurized pipe fittings are thin-walled stainless steel tube inserted into the bellows-type socket, the use of special tools will be stuck
stainless steel pipe in the pipe, the cross-sectional shape of its hexagonal clamping, combined with stainless steel pipe and pipe fittings between the O-ring seal, it has only leakage, anti-drawing, anti-vibration and high pressure and other characteristics. It is therefore a more advanced connector in direct drinking water systems, water systems, heating systems, steam systems, industrial tubing systems and industrial gas pipe systems.
Card sticky connection
The card-stick connection is achieved by applying a sealant to the end of the tube, inserting the tube into the tube socket and then using a special tool for extrusion connection.
Welded connection
Stainless steel pipe welding generally use argon arc seal back cover, manual arc welding cover, argon filling tube protection, so that the pipe inside the weld does not produce oxidation. For smaller diameter stainless steel pipe, argon arc welding can also be used directly back cover and cover. After welding stainless steel pipe, the weld surface should be protected, such as acid pickling passivation cream. According to the different forms of connection, welding can be divided into welding and socket welding.
Threaded connection
Thread connection, also known as threaded connection, it is through the internal and external threads to pipe and pipe, pipe and valve connected. This connection is mainly used for steel pipe, copper pipe and high pressure pipe connections.
Flange connection
Flange connection is the two pipes or fittings, each fixed to a flange, and then between the two flanges plus flange pad, and finally with two flanges to tighten the bolt tight a combination of ways to connect.
Groove connection
Groove connection also known as clamp connection, grooved pipe joints in the pipe, pipe fittings, such as the pipe joints into the annular groove, with a clamp, rubber seals and fasteners and other components of the sleeve quick connector. Installation, the adjacent pipe end sleeve shaped rubber seals, with splice fittings connected. The inner edge of the clamp is seated in the groove and fastened with fasteners to ensure the sealing performance of the pipe. This connection has no damage, fast construction, sealed, easy to remove and so on.
